PC Components - Processor Cooling

Outstanding cooling performance through liquid cooling. ARCTIC's Premium Liquid Freezer range offers impressively high performance at moderate prices without the complexity of conventional CPU water coolers. Completely maintenance-free, the all-in-one cooler with various models for smaller and larger cases covers all the most important current CPU sockets.

Ready Out-of-the-Box - Easy Installation    
The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.

Future-Proof Compatibility    
The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.    

Silent and Powerful VRM Fan    
The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.

Contact Frame for Intel LGA1700 and LGA1851    
Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

Optimised, In-House Developed Water Pump    
The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.

Complete Control or Simple Control    
Two connection cables - two control options:Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.

Native AMD Offset Mounting    
For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.

Improved Radiator Design    
The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.

High Static Pressure    
ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.

Limited Compatibility with Few Motherboards    
Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.    

Addressable LEDs for all Requirements    
ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.

Wide Range of Variants    
The Liquid Freezer III offers outstanding cooling performance in four different sizes and three variants. While the Black version is completely black, the A-RGB versions are available in black or white and have digitally addressable lighting for the pump head and radiator fans. With radiator sizes of 240, 360, 280 and 420, the Liquid Freezer III offers the ideal combination of performance, technology and design for everyone!

Quality You Can Rely On    
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

• Liquid Freezer III Series - Out Now!

Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

Suspended Spiral
Pump Head Design
The suspended spiral pump head inspired by the image of a vortex provides outstanding cooling performance and various lighting effects from different angles.

Highly Efficient Cooling Pump
High Performance Cooling
Performance data tested with Vortex 360 on AMD Ryzen 5600x

EPDM High-Density Tubing
The EPDM high-density tubing is very durable, making less loss of liquid.

Superior Fin Density
Massive 13 fins dissipate heat rapidly.

Antec Fusion PWM ARGB Fan
The Vortex 240 ARGB adopted the Antec Fusion PWM ARGB Fan with a unique multilateral-shaped lighting frame with 16 LEDs projecting the most harmonious lighting effects and providing more powerful cooling for the CPU.

Included ARGB Controller Working
in Sync with the Motherboard
The included ARGB controller works with the motherboard, customizing each individual LED in color and effect.

The Kraken Elite delivers chillingly cool performance with a display that makes custom content truly pop. The 640x640 resolution wide-angle LCD display creates a picture that's detailed and vivid regardless of your viewing angle.

INCREASED CUSTOMIZATION
A more powerful microcontroller allows for more immersive customization such as audio visualizers and the ability to relay CAM information with particle density animations.

TWICE AS BRIGHT
A bright 2.36" wide angle LCD screen supports custom images along with animated GIFs and features a crystal clear 640x640 display resolution, double that of previous generations.

STAY COOL
Powerfully quiet F Series Static Pressure fans provide cooling with superior heat dissipation capability. The 7th gen Asetek pump ensures your Kraken Elite cools optimally with 2800 RPM operation.

SIMPLE INSTALL
Setup is made simple with a single breakout cable that takes the guesswork out of the installation process. The liquid tubes are protected with reinforced nylon-braided sleeves for added durability and worry-free handling.

NZXT CAM-READY
Personalize screen content with custom images, GIF, or performance info with user-friendly NZXT CAM software. Control fan and pump speeds and run at 0 RPM mode at low temperatures to eliminate fan noise.

Silent Loop 2 120mm is the very high-performance and whisper-quiet all-in-one water cooling unit for demanding systems. The wealth of technical features and illumination effects make the Silent Loop 2 120mm not only a very silent and performant water cooler, but also an eye-catcher in any PC case.

Kraken 240 RGB
240mm AIO Liquid Cooler with LCD Display and RGB Fans

The Kraken delivers chillingly cool performance, an easy install, and a display screen for system specs or custom images.

LCD Display
1.54" square LCD display with 240x240 resolution, 30 Hz refresh rate, and high brightness

High-Performance Pump
The powerful Asetek pump circulates coolant efficiently and quietly.

Colorful Cooling
RGB Core Fans with fluid dynamic bearings provide powerful cooling and vivid RGB lighting.

Installation Made Easy
- A single breakout cable from pump to motherboard streamlines installation.
- Includes compatible mounting brackets for Intel (LGA 1700/1200/115X) and AMD processors (AM4, AM5).
- Pre-applied NZXT High-Performance Thermal Paste.
- Extended rubber tubing with durable nylon-braided sleeves for worry-free handling.

COOLER THAN COOL
Go cooler than cool with the Ryujin III. An expansive 3.5-inch LCD screen displays live system stats, animated GIFs, or even your own custom artwork. Underneath, a new 8th Gen Asetek pump quietly, paired with larger coolant tubes, keeps the latest processors from Intel and AMD cool, while an embedded Axial-tech fan helps control motherboard VRM temps. And the coolant within flows through a higher capacity radiator graced with three ROG 120 mm ARGB fans that utilize magnets to make installation a snap.

Magnetic Daisy-Chainable Fans
The customizable ARGB fans snap together with a magnetic connector that links the fans and transmits control signals and power. Only one cable is required for all three fans, making installation and cable management a breeze.

Full Color
3.5” LCD Display
Internal memory has also been doubled to support clearer default animations and longer videos.

System Monitoring
The industry-leading 3.5-inch LCD built into the pump block delivers instant monitoring of clock frequencies, voltages, temperatures, fan speeds and water flow, or your custom GIFs

Personalized Animation
Choose a pre-designed animation from the ROG gallery, or easily add one of your own.

Custom Wallpaper
Do you prefer banners or clan logos? Choose one designed by ROG, or put your own text or JPEG file on proud display at the heart of your rig.

Exploded View
The 8th Gen Asetek pump sports a 3-phase motor for higher flow and quieter operation, riding on a larger cold plate ideally sized for the latest Intel and AMD processors.

Cool Upgrades

New Cold Plate
The contact surface is now 32% larger to keep the chill on power hungry processors.

Enhanced Tubing
The sleeved rubber is wrapped in braided mesh, and the inner diameter has been enlarged from 5 mm to 7 mm to reduce flow resistance.

Thicker Radiator
279.5 x 120 x 30 mm radiator — 3mm thicker than previous gen, for improved cooling performance.

Embedded VRM Fan
A larger embedded Axial-tech fan improves airflow, reducing motherboard VRM temperatures by up to 35 Celsius.

Software Personalization

Fan Control
This generation of ROG all-in-one coolers now includes software that lets you control the speeds of your pump and embedded fan, in a way that should be instantly recognizable to FanXpert veterans.

AIDA64 Extreme
The ROG Ryujin III ARGB also comes with a one-year subscription to AIDA 64 Extreme, whose data can be fed live onto the cooler’s LCD screen to get even more info on the state of your system.

EXTENSIVE COMPATIBILITY
The ROG Ryujin III series features 400 mm of tubing and is compatible with a wide range of Intel® and AMD motherboard platforms, giving you ample processor and build flexibility.

The Kraken Elite delivers chillingly cool performance with a display that makes custom content truly pop. The 640x640 resolution wide-angle LCD display creates a picture that's detailed and vivid regardless of your viewing angle.

INCREASED CUSTOMIZATION
A more powerful microcontroller allows for more immersive customization such as audio visualizers and the ability to relay CAM information with particle density animations.

TWICE AS BRIGHT
A bright 2.36" wide angle LCD screen supports custom images along with animated GIFs and features a crystal clear 640x640 display resolution, double that of previous generations.

STAY COOL
Powerfully quiet F Series Static Pressure fans provide cooling with superior heat dissipation capability. The 7th gen Asetek pump ensures your Kraken Elite cools optimally with 2800 RPM operation.

SIMPLE INSTALL
Setup is made simple with a single breakout cable that takes the guesswork out of the installation process. The liquid tubes are protected with reinforced nylon-braided sleeves for added durability and worry-free handling.

NZXT CAM-READY
Personalize screen content with custom images, GIF, or performance info with user-friendly NZXT CAM software. Control fan and pump speeds and run at 0 RPM mode at low temperatures to eliminate fan noise.

Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

The Kraken delivers chillingly cool performance, an easy install, and a display screen for system specs or custom images.

PERFORMANCE IN REAL TIME
Proudly display custom images and system specs in real time. The 1.54" diameter LCD display screen provides a clean image.

STAY COOL
Powerfully quiet F Series Static Pressure fans provide cooling with superior heat dissipation capability. The 7th gen Asetek pump ensures your Kraken stays cool and quiet at 2800 RPM

SIMPLE INSTALL
Setup is made simple with a single breakout cable that takes the guesswork out of the installation process. The liquid tubes are protected with reinforced nylon-braided sleeves for added durability and worry-free handling.

NZXT CAM-READY
Personalize screen content with custom images or performance info with user-friendly NZXT CAM software. Control fan and pump speeds and run at 0 RPM mode at low temperatures to eliminate fan noise.

A worthy Freezer 7 Pro Successor:
Better Price - Better Performance
The ARCTIC Freezer 7 X is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC has been able to significantly improve the cooling performance of Freezer 7 X.

Compatible with Intel & AMD Sockets    
The Freezer 7 X is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.    

Pre-applied MX-2 Thermal Paste    
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan Thanks to its Low Coil Temperature    
The Freezer 7 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X.

Offset Heat Pipes Enable Optimal Heat Dissipation    
The direct touch heat pipes attached to the Freezer 7 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

More Efficient and Whisper Quiet    
In addition to operating more quietly, even at maximum speed, the Freezer 7 X built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X to run at a whisper-quiet 0.3 sone when at maximum speed.

10 % More Cooling Capacity with Freezer 7 X    
The ARCTIC Freezer 7 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

P-fan for Increased Performance    
Inspired by the P-series, the fan of the Freezer 7 X benefits from all of the advantages of P-fans:• High static pressure for increased cooling performance• Broad RPM range• Lower power consumption• Less vibration• PWM for synchronous fan controlFor additional information about the P-fans, we recommend our FAQ.

Fluid Dynamic Bearing    
Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

Direct Touch Heat Pipes    
The Freezer 7 X uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Pure Rock 2 is be quiet!’s CPU cooler for silent multimedia and graphics systems. It provides an excellent price-to-performance ratio with 150W TDP cooling efficiency, four 6mm heat pipes, a Pure Wings 2 120mm PWM fan and convenient design for mounting from atop the motherboard. Among the features that give it such an excellent price-to-performance ratio are:

Dark Rock is the high-end series of the be quiet! range of CPU coolers. It comprises double-tower, single-tower and top-flow cooler designs. They all offer incredible performance-to-noise ratios and the highest reliability available with absolutely no compromise in silence and performance. Dark Rock coolers are virtually inaudible and place the famous be quiet! SilentWings® technology at the heart of your PC. They are excellent for overclocked systems and demanding multi-graphics platforms.

No Compromise Silence and Performance
Dark Rock 4 offers an extreme cooling performance and virtually inaudible operation. Perfect for overclocked systems and demanding workstations.

- Silent Wings 135mm PWM fan features an advanced fluid-dynamic bearing and a smooth 6-pole motor
- Optimal balance of cooling and quietness with only 21.4dB(A) at maximum fan speed
- Six high-performance copper heat pipes that provide maximal heat conductance
- Wave-contoured cooling fins for increased air circulation
- Special black coating with ceramic particles enables perfect heat transfer
- Supports an additional 120mm fan; clips are included in scope of delivery
- Easily installable black installation kit can be mounted from above
- Elegant, brushed aluminum top cover with diamond cut finish
- 3-year manufacturer’s warranty
- Product conception, design and quality control in Germany

A worthy Freezer 7 Pro Successor: Better Price - Better Performance
The ARCTIC Freezer 7 X CO is a compact CPU cooler with one 92mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimized for high static pressure, ARCTIC was been able to significantly improve the Freezer 7 X CO's cooling performance.

Compatible with Intel & AMD Sockets    
The Freezer 7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.    

Pre-applied MX-2 Thermal Paste    
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

More Efficient and Whisper Quiet    
In addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.

10 % More Cooling Capacity with Freezer 7 X    
The ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

Longer Lifespan Thanks to its Low Coil Temperature    
The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.

Offset Heat Pipes Enable Optimal Heat Dissipation    
The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-fan for Increased Performance    
Inspired by the P-series, the Freezer 7 X CO's fan benefits from all of the advantages of P-fans:
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

Double Ball Bearing    
The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

Direct Touch Heat Pipes    
The Freezer 7 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Multilingual Manuals    
We offer a regulary updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.

• ARCTIC Freezer 7 X/7 X CO - Installation on AMD AM4
• ARCTIC Freezer 7 X/7 X CO - Installation on Intel 115X

The MAG series fights alongside gamers in pursuit of honor. With added military-inspired elements in these gaming products, they were reborn as the symbol of sturdiness and durability.

ELEVATED COPPER PLATE
The unique curved copper plate is designed to fully cover the CPU while offering rapid heat dissipation.

PUMP MOTOR RESONANCE ELIMINATION
A durable three phase motor at the core of the pump generates minimal vibrations for long-lasting operation.

HIGH THERMAL DISSIPATION
The radiator has a 12 pathway designed to help rapidly dissipate heat.

EVAPORATION PROOF TUBING
Constructed with three layers of netted plastic tubing and a reinforced mesh exterior.

MYSTIC LIGHT COMPATIBLE
Show off your colors with full ARGB customization on the fans and cooling block.

EXTENSIVE COMPATIBILITY
Stylish yet built for flexibility, the MAG CORELIQUID M360 has been designed with a secure installation bundle with compatibility on a number of Intel and AMD motherboards.

Intel Socket
LGA 1150/1151/1155/1156/1200/1700
LGA 2011/2011-3/2066
AMD Socket
AM5/AM4/TR4
 

Customize your CPU water-cooling from subtle to stunning with Lumen’s six addressable LEDs that you can command via motherboard or controller. Compatible with most common Intel/AMD sockets, including LGA1700 and AM5 and RGB certified by industry standards, the Lumen offers high-end cooling performance and premium ARGB effects for new and seasoned builders alike.

The right way up
- The removable top can be turned at 90-degree intervals, making the logotype horizontal independent of the mounting orientation
- Low-permeability rubber tubes with braided nylon sleeves

From subtle to stunning
- Duality design provides both a stealthy and illuminated look, controlled from your motherboard RGB UI
- Six ARGB LEDs are yours to command via your motherboard or controller

Powerful aspects
Aspect fans for low turbulence and chaining support

Forget the thermal paste
- Thermal paste is pre-applied to ensure a proper and pain-free installation
- Articulating elbow fittings make tubes easier to route and reduces tension on the cold plate housing

Common denominators
- Compatible with LGA 1700 and AM5
- Supports the most common sockets for both Intel and AMD

Color-coordinate your cooling
Compatible with ASUS AURA, Gigabyte Fusion, MSI Mystic Light, ASRock Polychrome and Razer Chroma

COMPACT and COMPELLING
HYPER H412R
The Hyper H412R is an affordable, compact and high performance air cooler that is a great fit for small form factor system. With 4 heatpipes and Direct Contact technology, this outperforms its predecessor Hyper TX3 series. The special fin design optimizes air flow toward heatpipes. Its 92mm PWM fan features a wide fan speed range and can be fine tuned for maximum airflow and cooling performance or silent operation.

Performance in Compact Size
With height of 136.5mm, the Hyper H412R is a compact tower cooler, designed to fit in tight builds. With its outstanding performance in its class, it is a great solution for Micro ATX and Mini ITX boards.

4 Direct Contact Heatpipes
Just like the Hyper 212, it includes 4 Direct Contact heatpipes constructed out of copper to accerates the heat conduction through the entire heatpipe. This allows heat to be dissipated quickly and efficiently throught the funnel shaped aluminum fins.

Perfecting the Heatsink Design
Cooler Master's years of aluminum fin craftmanship is second to none. Optimized fin stacked distance between each layer is based on stringent airflow tests from our labs. As a result, even with a compact-size each heatsink with the 92mm fan is able to maintain performance in a compact build.

Easy Installation
Tool-free mounting system ensures hassle-free installation. Universal retention brackets are compatible with latest Intel and AMD socket CPU.

Cooler Master has built upon the classic MasterLiquid L Series to present a redesigned and improved release of the MasterLiquid 240L Core. Featuring new design elements that bring a classic minimalist look to the series, the MasterLiquid 240L Core represents Cooler Master’s ongoing innovative spirit.

Gen S Dual Chamber Pump
Redesigned copper base targets heat spots with precision along with boosted water flow and pressure for enhanced cooling performance.

Expanded Radiator Surface
Expanded radiator fin surface accelerates heat dissipation for superior cooling.

120mm Fans
Upgraded 120mm fan delivers optimal radiator performance.

CryoFuze Thermal Paste
Includes premium CryoFuze thermal paste for exceptional heat conductivity.

CLEAN CLASSIC DESIGN
Clean minimalist design brings a refreshed modern facelift to the pump cover.

Outstanding cooling performance through liquid cooling. ARCTIC's Premium Liquid Freezer range offers impressively high performance at moderate prices without the complexity of conventional CPU water coolers. Completely maintenance-free, the all-in-one cooler with various models for smaller and larger cases covers all the most important current CPU sockets.

• Liquid Freezer III Series - Out Now!

Outstanding cooling performance through liquid cooling. ARCTIC's Premium Liquid Freezer range offers impressively high performance at moderate prices without the complexity of conventional CPU water coolers. Completely maintenance-free, the all-in-one cooler with various models for smaller and larger cases covers all the most important current CPU sockets.

• Liquid Freezer III Series - Out Now!

EXTREMELY COMPACT DESIGN
Fits into virtually all PC builds
Pure Rock LP has the smallest dimensions of all be quiet! air coolers. With this ultra-compact design and just 45mm height it fits even into the tightest PC builds like Mini-ITX motherboards and small form factor cases.

SOLID COOLING EFFICIENCY
A good choice for compact dimensions
With 100W TDP Pure Rock LP reliably cools HTPCs and small multimedia or gaming systems. 3 high-performance heatpipes take care for no PC build at all to overheat.

QUIET COOLING
Only 30.6dB(A) at maximum fan speed
The 15mm thin be quiet! 92mm PWM fan with high-quality rifle bearing facilitates the best balance between cooling performance and silent operation while keeping the cooler as low as possible.

PERFECT CHOICE FOR SMALL FORM FACTOR
Highly convenient design
The space-saving design that allows you easy access to components even in the very tight confines of compact PCs. Pure Rock LP comes out of the box with the full set of installation kits for Intel and AMD consumer chipsets.
 

• Pure Rock LP Product presentation
• Installation: Pure Rock LP

CORSAIR A115
HIGH-PERFORMANCE TWIN TOWER AIR CPU COOLER
ENGINEERED TO UNLOCK YOUR CPU’S POTENTIAL

ENGINEERED FOR PERFORMANCE
High-performance XTM70 thermal paste pre-applied for convenience and performance.

Optimized convex copper cold plate ensures superior surface contact and thermal transfer on both Intel and AMD CPUs.

Six 6mm heat pipes for high-efficiency thermal transfer from cold plate to fin stack, cooling up to 270W TDP.

AHEAD OF THE COMPETITION
The A115 sets a new standard among performance CPU Air Coolers. With the high power draw and heat generated by the latest processors, every degree matters.

SLIDE-AND-LOCK
The next evolution of CORSAIR's innovative ratcheting Slide-and-Lock fan mount system, now slimmer than ever, lets you adjust the height of the fans tool-free to easily accommodate nearly any DRAM module on the market – or replace your memory on the fly.

OPTIMAL AIRFLOW WITH PERFORMANCE FANS
Two high-performance AF140 ELITE 140mm fans with CORSAIR AirGuide technology use anti-vortex vanes to direct airflow into a concentrated stream, providing more even airflow across the fin stack and supporting overall case airflow.

HOLDFAST 2.0
CORSAIR’s acclaimed retention system gets an upgrade to ensure even more consistent thermal performance and easier installation, with the same secure and reliable fit on the latest Intel® and AMD® CPUs, including LGA 1700, 1200, 115x, and AMD Socket AM5 / AM4.